BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Licence Training Australia - ECPv6.18.3//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-WR-CALNAME:Licence Training Australia
X-ORIGINAL-URL:https://lta.itcc.net.au
X-WR-CALDESC:Events for Licence Training Australia
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:Australia/Melbourne
BEGIN:STANDARD
TZOFFSETFROM:+1100
TZOFFSETTO:+1000
TZNAME:AEST
DTSTART:20250405T160000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+1000
TZOFFSETTO:+1100
TZNAME:AEDT
DTSTART:20251004T160000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+1100
TZOFFSETTO:+1000
TZNAME:AEST
DTSTART:20260404T160000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+1000
TZOFFSETTO:+1100
TZNAME:AEDT
DTSTART:20261003T160000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+1100
TZOFFSETTO:+1000
TZNAME:AEST
DTSTART:20270403T160000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+1000
TZOFFSETTO:+1100
TZNAME:AEDT
DTSTART:20271002T160000
END:DAYLIGHT
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=Australia/Melbourne:20261124T080000
DTEND;TZID=Australia/Melbourne:20261125T160000
DTSTAMP:20261004T043904Z
CREATED:20261004T043904Z
LAST-MODIFIED:20261004T043904Z
UID:5821-1795507200-1795622400@lta.itcc.net.au
SUMMARY:Forklift Course Warrnambool
DESCRIPTION:Forklifts are perhaps the most versatile & commonly used machinery used in Industry. \nWhile most industrial workplaces have at least one forklift\, this is High Risk Equipment & operators need to be properly trained & licenced. \nHigh Risk Work National Licences are valid across Australia & are for Forklifts of any capacity. \nCOURSE CONTENT SUMMARY \nAt the successful completion of this course\, participants will be able to safely inspect & operate a forklift.\nCourse contents include: \n• Legislative Requirements\n• Hazard Identification & Control\n• Communications\n• Pre-Start inspections\n• Start up operational checks\n• General Operations\n• Rated Capacity\n• Load Centre Principles\n• Calculations of load weight\n• Shut Down \nCOURSE REQUIREMENTS\n• Applicants must be over 18 & have a good grasp of English & a basic ability for math.\n• Pre-Study material is issued for this course. \nWHAT DO I DO ON THE DAY? \n• Training is a combination of theory\, practical & assessment—16 hours over two days. \nWHAT DO I GET ON COMPLETION OF THE COURSE? \nOn successful completion of this course\, students will be issued with a Nationally Recognised Statement of Attainment for TLILIC0003—Licence to Operate a Forklift Truck. \nA notice of satisfactory assessment is issued & the applicant is required to take this to any Australia Post outlet within 60 days\, along with 100 points of ID & Worksafe licence fee. \nThe Unique Student Identifier (USI) must be supplied and verified prior to issuance. \n 
URL:https://lta.itcc.net.au/event/forklift-course-warrnambool-5/
LOCATION:McKinnon Quarries & Civil\, 6 Chatham Ct\, Warrnambool\, Victoria\, 3280\, Australia
ATTACH;FMTTYPE=image/jpeg:https://lta.itcc.net.au/wp-content/uploads/2022/06/Forklift-2.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Melbourne:20261123T083000
DTEND;TZID=Australia/Melbourne:20261123T143000
DTSTAMP:20261004T044510Z
CREATED:20261004T044510Z
LAST-MODIFIED:20261004T044510Z
UID:5830-1795422600-1795444200@lta.itcc.net.au
SUMMARY:White Card Course Warrnambool
DESCRIPTION:This course is endorsed by & meets the requirements of Worksafe Authorities Nationally\nconcerning induction training for the building & construction industry. \nThe “Construction Induction Card’ (WHITE CARD) issued upon successful completion of the course is\nissued by Worksafe Victoria & legally entitles the holder for entry to building & construction sites throughout Australia. \nTOPICS COVERED: \n-Legislation\, Industry agreements & training \n-Workcover & the inspectorate \n-Codes of practice\, workers compensation \n-Working at heights \n-Organising OH&S \n-Risk Management \n-Material Safety Data Sheets (M.S.D.S) \n-Manual Handling \n-Site signage\, emergency & evacuation \n-Scaffolding Standards \n-Sexual Harassment & Bullying Trenching \n-Building Hazards/Control \n-P.P.E \n-Confined Space Hazards \nPhoto identification MUST be supplied on day of Course. \nThe Unique Student Identifier (USI) must be supplied and verified prior to issuance.
URL:https://lta.itcc.net.au/event/white-card-course-warrnambool/
LOCATION:The Flying Horse\, 10691 Princes Hwy\, Warrnambool\, Victoria\, 3280\, Australia
ATTACH;FMTTYPE=image/jpeg:https://lta.itcc.net.au/wp-content/uploads/2022/06/White-Card.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Melbourne:20261104T083000
DTEND;TZID=Australia/Melbourne:20261106T163000
DTSTAMP:20261018T103107Z
CREATED:20260916T075419Z
LAST-MODIFIED:20261018T103107Z
UID:5766-1793781000-1793982600@lta.itcc.net.au
SUMMARY:Telehandler High Risk Licence Course Horsham
DESCRIPTION:Telehandlers over 3 tonne S.W.L require High Risk Work Licencing. \nPreviously classified as cranes\, these machines now have their own classification. This is High Risk Equipment & operators need to be properly trained & licenced. \nHigh Risk Work licence issued is valid for Telehandlers of any capacity. \nCOURSE CONTENT SUMMARY \nAt the successful completion of this course\, participants will be able to safely inspect & operate a Telehandler.\nCourse contents include: \n• Legislative Requirements\n• Hazard Identification & Control\n• Communications\n• Pre-Start inspections\n• Start up operational checks\n• General Operations\n• Rated Capacity\n• Load Centre Principles\n• Calculations of load weight\n• Shut Down \nCOURSE REQUIREMENTS\n• Applicants must be over 18 & have a good grasp of English & a basic ability for math.\n• Pre-Study material is issued for this course. \nCOURSE OVERVIEW \n• Training is a combination of theory\, practical & assessment— 24 hours over three days. \nWHAT DO I GET ON COMPLETION OF THE COURSE? \nOn successful completion of this course\, students will be issued with a Nationally Recognised\nStatement of Attainment for 11249NAT Licence to Operate a Non-Slewing Telehandler. \nA notice of satisfactory assessment is issued & the applicant is required to take this to any Australia Post outlet within 60 days\, along with 100 points of ID & Worksafe licence fee. \nThe Unique Student Identifier (USI) must be supplied and verified prior to issuance. \n*Students will be required to present photo I.D on arrival\, wear normal casual clothing and safety footwear and have completed pre-study material. \nStudents will be provided with morning tea and coffee.\nKitchen facilities are available to people who wish to bring their own lunch or alternatively there are cafés and lunch bars within close proximity. \nDelivered in association with The Management Edge (Trade Training) RTO #3927
URL:https://lta.itcc.net.au/event/telehandler-high-risk-licence-course-horsham/
LOCATION:O’Connors\, 423 Western Hwy\, Horsham\, Victoria\, 3400\, Australia
ATTACH;FMTTYPE=image/jpeg:https://lta.itcc.net.au/wp-content/uploads/2024/07/Telehandler-2.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Melbourne:20261029T080000
DTEND;TZID=Australia/Melbourne:20261030T160000
DTSTAMP:20261019T073643Z
CREATED:20260928T084106Z
LAST-MODIFIED:20261019T073643Z
UID:5782-1793260800-1793376000@lta.itcc.net.au
SUMMARY:Forklift Course Warrnambool
DESCRIPTION:Forklifts are perhaps the most versatile & commonly used machinery used in Industry. \nWhile most industrial workplaces have at least one forklift\, this is High Risk Equipment & operators need to be properly trained & licenced. \nHigh Risk Work National Licences are valid across Australia & are for Forklifts of any capacity. \nCOURSE CONTENT SUMMARY \nAt the successful completion of this course\, participants will be able to safely inspect & operate a forklift.\nCourse contents include: \n• Legislative Requirements\n• Hazard Identification & Control\n• Communications\n• Pre-Start inspections\n• Start up operational checks\n• General Operations\n• Rated Capacity\n• Load Centre Principles\n• Calculations of load weight\n• Shut Down \nCOURSE REQUIREMENTS\n• Applicants must be over 18 & have a good grasp of English & a basic ability for math.\n• Pre-Study material is issued for this course. \nWHAT DO I DO ON THE DAY? \n• Training is a combination of theory\, practical & assessment—16 hours over two days. \nWHAT DO I GET ON COMPLETION OF THE COURSE? \nOn successful completion of this course\, students will be issued with a Nationally Recognised Statement of Attainment for TLILIC0003—Licence to Operate a Forklift Truck. \nA notice of satisfactory assessment is issued & the applicant is required to take this to any Australia Post outlet within 60 days\, along with 100 points of ID & Worksafe licence fee. \nThe Unique Student Identifier (USI) must be supplied and verified prior to issuance. \n 
URL:https://lta.itcc.net.au/event/forklift-course-warrnambool-7/
LOCATION:McKinnon Quarries & Civil\, 6 Chatham Ct\, Warrnambool\, Victoria\, 3280\, Australia
ATTACH;FMTTYPE=image/jpeg:https://lta.itcc.net.au/wp-content/uploads/2023/01/Forklift.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Melbourne:20261027T080000
DTEND;TZID=Australia/Melbourne:20261028T160000
DTSTAMP:20260928T084526Z
CREATED:20260928T084342Z
LAST-MODIFIED:20260928T084526Z
UID:5785-1793088000-1793203200@lta.itcc.net.au
SUMMARY:Forklift Course Warrnambool
DESCRIPTION:Forklifts are perhaps the most versatile & commonly used machinery used in Industry. \nWhile most industrial workplaces have at least one forklift\, this is High Risk Equipment & operators need to be properly trained & licenced. \nHigh Risk Work National Licences are valid across Australia & are for Forklifts of any capacity. \nCOURSE CONTENT SUMMARY \nAt the successful completion of this course\, participants will be able to safely inspect & operate a forklift.\nCourse contents include: \n• Legislative Requirements\n• Hazard Identification & Control\n• Communications\n• Pre-Start inspections\n• Start up operational checks\n• General Operations\n• Rated Capacity\n• Load Centre Principles\n• Calculations of load weight\n• Shut Down \nCOURSE REQUIREMENTS\n• Applicants must be over 18 & have a good grasp of English & a basic ability for math.\n• Pre-Study material is issued for this course. \nWHAT DO I DO ON THE DAY? \n• Training is a combination of theory\, practical & assessment—16 hours over two days. \nWHAT DO I GET ON COMPLETION OF THE COURSE? \nOn successful completion of this course\, students will be issued with a Nationally Recognised Statement of Attainment for TLILIC0003—Licence to Operate a Forklift Truck. \nA notice of satisfactory assessment is issued & the applicant is required to take this to any Australia Post outlet within 60 days\, along with 100 points of ID & Worksafe licence fee. \nThe Unique Student Identifier (USI) must be supplied and verified prior to issuance. \n 
URL:https://lta.itcc.net.au/event/forklift-course-warrnambool-9/
LOCATION:McKinnon Quarries & Civil\, 6 Chatham Ct\, Warrnambool\, Victoria\, 3280\, Australia
ATTACH;FMTTYPE=image/jpeg:https://lta.itcc.net.au/wp-content/uploads/2022/06/Forklift-2.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Melbourne:20261026T083000
DTEND;TZID=Australia/Melbourne:20261026T143000
DTSTAMP:20260928T084834Z
CREATED:20260928T084834Z
LAST-MODIFIED:20260928T084834Z
UID:5788-1793003400-1793025000@lta.itcc.net.au
SUMMARY:Scissorlift Course Warrnambool
DESCRIPTION:An Elevated Work Platform (EWP) with a nominal reach of 11 metres or more requires that the operator have Worksafe Licencing. Smaller EWP operation still requires the employer to provide adequate information\, instruction and training to their employees. EWP operation is often the most effective method to safely work at heights. \nA Nationally recognised qualification is issued on successful completion. \nThis Competency covers Scissor & Vertical Lifts of any size or height. \nCOURSE CONTENT SUMMARY \nAt the completion of this course\, participants will be able to safely inspect and use an Elevated Work Platform. Most trades in most industries require their workers to gain access to jobs at heights. \nCourse outline includes: \n• Regulations\n• Duties of employers and employees\n• Hazard Identification\n• Hazard control measures\n• Duty of care\n• Pre-Start Inspections\n• Log Book Documentation\n• Emergency Descent Procedures and Methods\n• Rescue Procedures\n• Safety Equipment\n• Traffic/Pedestrian Control\n• Tools and Equipment\n• Harness Fitting & Inspection \nWHAT DO I DO ON THE DAY? \n• Training is a combination of theory and practical — approx. 3 hour classroom & 3 hour practical. \nWHAT DO I GET ON COMPLETION OF THE COURSE? \nOn successful completion of this course\, students will be issued with a Nationally Recognised Statement of Attainment & pocket competency card for RIIHAN301E Operate Elevating Work Platform. \nNotice of Satisfactory Assessment is issued for EWP operation. \nThe Unique Student Identifier (USI) must be supplied and verified prior to issuance.
URL:https://lta.itcc.net.au/event/scissorlift-course-warrnambool/
LOCATION:McKinnon Quarries & Civil\, 6 Chatham Ct\, Warrnambool\, Victoria\, 3280\, Australia
ATTACH;FMTTYPE=image/jpeg:https://lta.itcc.net.au/wp-content/uploads/2025/04/JLG-Scissorlift.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Melbourne:20261016T083000
DTEND;TZID=Australia/Melbourne:20261016T143000
DTSTAMP:20260816T094934Z
CREATED:20260816T094934Z
LAST-MODIFIED:20260816T094934Z
UID:5687-1792139400-1792161000@lta.itcc.net.au
SUMMARY:Construction Induction (White Card) Course Warrnambool
DESCRIPTION:This course is endorsed by & meets the requirements of Worksafe Authorities Nationally\nconcerning induction training for the building & construction industry. \nThe “Construction Induction Card’ (WHITE CARD) issued upon successful completion of the course is\nissued by Worksafe Victoria & legally entitles the holder for entry to building & construction sites throughout Australia. \nTOPICS COVERED: \n-Legislation\, Industry agreements & training \n-Workcover & the inspectorate \n-Codes of practice\, workers compensation \n-Working at heights \n-Organising OH&S \n-Risk Management \n-Material Safety Data Sheets (M.S.D.S) \n-Manual Handling \n-Site signage\, emergency & evacuation \n-Scaffolding Standards \n-Sexual Harassment & Bullying Trenching \n-Building Hazards/Control \n-P.P.E \n-Confined Space Hazards \nPhoto identification MUST be supplied on day of Course. \nThe Unique Student Identifier (USI) must be supplied and verified prior to issuance.
URL:https://lta.itcc.net.au/event/construction-induction-white-card-course-warrnambool-2/
LOCATION:The Flying Horse\, 10691 Princes Hwy\, Warrnambool\, Victoria\, 3280\, Australia
ATTACH;FMTTYPE=image/jpeg:https://lta.itcc.net.au/wp-content/uploads/2022/10/White-Card-Pic.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Melbourne:20261014T080000
DTEND;TZID=Australia/Melbourne:20261015T160000
DTSTAMP:20260816T095148Z
CREATED:20260816T095148Z
LAST-MODIFIED:20260816T095148Z
UID:5690-1791964800-1792080000@lta.itcc.net.au
SUMMARY:Elevated Work Platform (EWP) Course Warrnambool
DESCRIPTION:An Elevated Work Platform with a nominal reach of 11 meters or more requires that the operator have Worksafe accreditation. Smaller EW operation still requires the employer to provide adequate information\, instruction & training to their employees. \nEW operation is often the most effective method to safely work at heights. A National “High Risk” Licence for EWP allows for operation of machines of any configuration & size Australia wide. \nCOURSE CONTENT SUMMARY \nAt the successful completion of this course\, participants will be able to safely inspect & operate an EWP. Course contents include: \n• Legislative Requirements\n• Hazard Identification & Control\n• Communications\n• Pre-Start inspections\n• Start up operational checks\n• General Operations\n• Emergency Descent Procedures & Methods\n• Rescue Procedures\n• Harness fitting & inspection\n• Shut Down \nCOURSE REQUIREMENTS\n• Applicants must be over 18 & have a good grasp of English & a basic ability for math.\n• Pre-Study material is issued for this course. \nWHAT DO I DO ON THE DAY? \n• Training is a combination of theory\, practical & assessment—16 hours over two days. \nWHAT DO I GET ON COMPLETION OF THE COURSE? \nOn successful completion of this course\, students will be issued with a Nationally Recognised\nStatement of Attainment for TLILIC0005—Licence to Operate a Boom Type Elevating Work\nPlatform. \nA notice of satisfactory assessment is issued & the applicant is required to take this to\nany Australia Post outlet within 60 days\, along with 100 points of ID & WorkSafe licence fee.
URL:https://lta.itcc.net.au/event/elevated-work-platform-ewp-course-warrnambool/
LOCATION:McKinnon Quarries & Civil\, 6 Chatham Ct\, Warrnambool\, Victoria\, 3280\, Australia
ATTACH;FMTTYPE=image/jpeg:https://lta.itcc.net.au/wp-content/uploads/2023/07/EWP.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Melbourne:20261008T083000
DTEND;TZID=Australia/Melbourne:20261008T143000
DTSTAMP:20260929T110515Z
CREATED:20260816T095922Z
LAST-MODIFIED:20260929T110515Z
UID:5699-1791448200-1791469800@lta.itcc.net.au
SUMMARY:Scissorlift Course Horsham
DESCRIPTION:An Elevated Work Platform (EWP) with a nominal reach of 11 metres or more requires that the operator have Worksafe Licencing. Smaller EWP operation still requires the employer to provide adequate information\, instruction and training to their employees. EWP operation is often the most effective method to safely work at heights. \nA Nationally recognised qualification is issued on successful completion. \nThis Competency covers Scissor & Vertical Lifts of any size or height. \nCOURSE CONTENT SUMMARY \nAt the completion of this course\, participants will be able to safely inspect and use an Elevated Work Platform. Most trades in most industries require their workers to gain access to jobs at heights. \nCourse outline includes: \n• Regulations\n• Duties of employers and employees\n• Hazard Identification\n• Hazard control measures\n• Duty of care\n• Pre-Start Inspections\n• Log Book Documentation\n• Emergency Descent Procedures and Methods\n• Rescue Procedures\n• Safety Equipment\n• Traffic/Pedestrian Control\n• Tools and Equipment\n• Harness Fitting & Inspection \nWHAT DO I DO ON THE DAY? \n• Training is a combination of theory and practical — approx. 3 hour classroom & 3 hour practical. \nWHAT DO I GET ON COMPLETION OF THE COURSE? \nOn successful completion of this course\, students will be issued with a Nationally Recognised Statement of Attainment & pocket competency card for RIIHAN301E Operate Elevating Work Platform. \nNotice of Satisfactory Assessment is issued for EWP operation. \nThe Unique Student Identifier (USI) must be supplied and verified prior to issuance.
URL:https://lta.itcc.net.au/event/scissorlift-course-horsham/
LOCATION:Golden Grain Motor Inn\, 6 Dimboola Rd\, Horsham\, Victoria\, 3400\, Australia
ATTACH;FMTTYPE=image/jpeg:https://lta.itcc.net.au/wp-content/uploads/2025/04/JLG-Scissorlift.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Melbourne:20261007T083000
DTEND;TZID=Australia/Melbourne:20261007T160000
DTSTAMP:20260929T110549Z
CREATED:20260816T100128Z
LAST-MODIFIED:20260929T110549Z
UID:5702-1791361800-1791388800@lta.itcc.net.au
SUMMARY:Work Safely at Heights Course Horsham
DESCRIPTION:Workplace Health & Safety (Prevention of falls) Regulations 2012 (2017 Vic) are now in effect. \nThese regulations place obligations on employers to take preventative action if there is any likelihood of an employee being subjected to a fall risk from one level to another. \nSafe Working at Heights is a must for most employees in the workforce. This course covers all training requirements as detailed in the National Code of Practice – Managing the risks of Falls in the Workplace (Dec 2011) \nCOURSE CONTENT SUMMARY \nAt the completion of this course\, applicants will have a clear understanding of their rights and obligations under the Prevention of falls regulations.\nThey will be able to identify the hazards associated with falls risks & implement effective control measures. \n• Introduction to WHS (Prevention of Falls) Regulations\n• Duties of employers\n• Duties of employees\n• Duty of Care\n• Hazard Identification\n• Hazard Control Measures\n• Safe use of Ladders\n• Safe use of Scaffolds\n• Safe use of Elevated Work Platforms\n• Passive fall prevention devices\n• Work positioning systems\n• Fall restraint systems\n• Fall arrest systems\n• Harness fitting and inspection \nWHAT DO I DO ON THE DAY? \n• Training is a combination of theory and practical – 8 hours. \nWHAT DO I GET ON COMPLETION OF THE COURSE? \nOn successful completion of this course\, students will be issued with a Nationally Recognised Statement of Attainment for RIIWHS204E Work Safely at Heights and a wallet sized card. \nThe Unique Student Identifier (USI) must be supplied and verified prior to issuance (www.usi.gov.au)
URL:https://lta.itcc.net.au/event/work-safely-at-heights-course-horsham-3/
LOCATION:O’Connors\, 423 Western Hwy\, Horsham\, Victoria\, 3400\, Australia
ATTACH;FMTTYPE=image/jpeg:https://lta.itcc.net.au/wp-content/uploads/2022/10/Working-at-Heights.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Melbourne:20261006T083000
DTEND;TZID=Australia/Melbourne:20261006T160000
DTSTAMP:20260816T100708Z
CREATED:20260816T100401Z
LAST-MODIFIED:20260816T100708Z
UID:5705-1791275400-1791302400@lta.itcc.net.au
SUMMARY:Confined Space Entry Course Horsham
DESCRIPTION:Work in Confined Spaces is one of the most dangerous tasks performed in the workplace. \nOn average 15 workers are killed in Australia Each year whilst working in confined spaces. \nBecause of this\, training is compulsory and employers are obligated to ensure training for the employees is current and up to date. \nCOURSE CONTENT SUMMARY \nAt the completion of this course\, applicants will be able to safely identify confined spaces\, hazards applicable to confined spaces and methods to control these hazards. \nContent includes: \n• Regulations\n• Duties of employers and employees\n• Hazard Identification\n• Hazard control measures & hierarchy of control\n• Exposure Limits TWA & STEL\n• Safe work procedures\n• Personal Protective Equipment\n• Entry permit requirements\n• Rescue procedures\n• Emergency procedures\n• Safe methods of entry and exit\n• Restricted spaces\n• Duties of attendant\, entrant and supervisor \nWHAT DO I DO ON THE DAY? \n• Training is a combination of theory and practical—8 hours. \nWHAT DO I GET ON COMPLETION OF THE COURSE? \nOn successful completion of this course\, students will be issued with a Nationally Recognised Statement of Attainment for RIIWHS202E Enter and Work in Confined Spaces and a wallet sized card.\nThe Unique Student Identifier (USI) must be supplied and verified prior to issuance (www.usi.gov.au)
URL:https://lta.itcc.net.au/event/confined-space-entry-course-horsham-3/
LOCATION:O’Connors\, 423 Western Hwy\, Horsham\, Victoria\, 3400\, Australia
ATTACH;FMTTYPE=image/jpeg:https://lta.itcc.net.au/wp-content/uploads/2022/10/Confined-Space-2.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Melbourne:20261001T080000
DTEND;TZID=Australia/Melbourne:20261002T160000
DTSTAMP:20260817T101557Z
CREATED:20260816T095439Z
LAST-MODIFIED:20260817T101557Z
UID:5693-1790841600-1790956800@lta.itcc.net.au
SUMMARY:Forklift Course Warrnambool
DESCRIPTION:Forklifts are perhaps the most versatile & commonly used machinery used in Industry. \nWhile most industrial workplaces have at least one forklift\, this is High Risk Equipment & operators need to be properly trained & licenced. \nHigh Risk Work National Licences are valid across Australia & are for Forklifts of any capacity. \nCOURSE CONTENT SUMMARY \nAt the successful completion of this course\, participants will be able to safely inspect & operate a forklift.\nCourse contents include: \n• Legislative Requirements\n• Hazard Identification & Control\n• Communications\n• Pre-Start inspections\n• Start up operational checks\n• General Operations\n• Rated Capacity\n• Load Centre Principles\n• Calculations of load weight\n• Shut Down \nCOURSE REQUIREMENTS\n• Applicants must be over 18 & have a good grasp of English & a basic ability for math.\n• Pre-Study material is issued for this course. \nWHAT DO I DO ON THE DAY? \n• Training is a combination of theory\, practical & assessment—16 hours over two days. \nWHAT DO I GET ON COMPLETION OF THE COURSE? \nOn successful completion of this course\, students will be issued with a Nationally Recognised Statement of Attainment for TLILIC0003—Licence to Operate a Forklift Truck. \nA notice of satisfactory assessment is issued & the applicant is required to take this to any Australia Post outlet within 60 days\, along with 100 points of ID & Worksafe licence fee. \nThe Unique Student Identifier (USI) must be supplied and verified prior to issuance. \n 
URL:https://lta.itcc.net.au/event/forklift-course-warrnambool/
LOCATION:McKinnon Quarries & Civil\, 6 Chatham Ct\, Warrnambool\, Victoria\, 3280\, Australia
ATTACH;FMTTYPE=image/jpeg:https://lta.itcc.net.au/wp-content/uploads/2023/01/Forklift.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Melbourne:20260929T080000
DTEND;TZID=Australia/Melbourne:20260930T160000
DTSTAMP:20260816T095718Z
CREATED:20260816T095718Z
LAST-MODIFIED:20260816T095718Z
UID:5696-1790668800-1790784000@lta.itcc.net.au
SUMMARY:Forklift Course Warrnambool
DESCRIPTION:Forklifts are perhaps the most versatile & commonly used machinery used in Industry. \nWhile most industrial workplaces have at least one forklift\, this is High Risk Equipment & operators need to be properly trained & licenced. \nHigh Risk Work National Licences are valid across Australia & are for Forklifts of any capacity. \nCOURSE CONTENT SUMMARY \nAt the successful completion of this course\, participants will be able to safely inspect & operate a forklift.\nCourse contents include: \n• Legislative Requirements\n• Hazard Identification & Control\n• Communications\n• Pre-Start inspections\n• Start up operational checks\n• General Operations\n• Rated Capacity\n• Load Centre Principles\n• Calculations of load weight\n• Shut Down \nCOURSE REQUIREMENTS\n• Applicants must be over 18 & have a good grasp of English & a basic ability for math.\n• Pre-Study material is issued for this course. \nWHAT DO I DO ON THE DAY? \n• Training is a combination of theory\, practical & assessment—16 hours over two days. \nWHAT DO I GET ON COMPLETION OF THE COURSE? \nOn successful completion of this course\, students will be issued with a Nationally Recognised Statement of Attainment for TLILIC0003—Licence to Operate a Forklift Truck. \nA notice of satisfactory assessment is issued & the applicant is required to take this to any Australia Post outlet within 60 days\, along with 100 points of ID & Worksafe licence fee. \nThe Unique Student Identifier (USI) must be supplied and verified prior to issuance. \n 
URL:https://lta.itcc.net.au/event/forklift-course-warrnambool-2/
LOCATION:McKinnon Quarries & Civil\, 6 Chatham Ct\, Warrnambool\, Victoria\, 3280\, Australia
ATTACH;FMTTYPE=image/jpeg:https://lta.itcc.net.au/wp-content/uploads/2022/06/Forklift-2.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Melbourne:20260928T083000
DTEND;TZID=Australia/Melbourne:20260928T143000
DTSTAMP:20260828T091701Z
CREATED:20260828T091701Z
LAST-MODIFIED:20260828T091701Z
UID:5740-1790584200-1790605800@lta.itcc.net.au
SUMMARY:Scissorlift Course Warrnambool
DESCRIPTION:An Elevated Work Platform (EWP) with a nominal reach of 11 metres or more requires that the operator have Worksafe Licencing. Smaller EWP operation still requires the employer to provide adequate information\, instruction and training to their employees. EWP operation is often the most effective method to safely work at heights. \nA Nationally recognised qualification is issued on successful completion. \nThis Competency covers Scissor & Vertical Lifts of any size or height. \nCOURSE CONTENT SUMMARY \nAt the completion of this course\, participants will be able to safely inspect and use an Elevated Work Platform. Most trades in most industries require their workers to gain access to jobs at heights. \nCourse outline includes: \n• Regulations\n• Duties of employers and employees\n• Hazard Identification\n• Hazard control measures\n• Duty of care\n• Pre-Start Inspections\n• Log Book Documentation\n• Emergency Descent Procedures and Methods\n• Rescue Procedures\n• Safety Equipment\n• Traffic/Pedestrian Control\n• Tools and Equipment\n• Harness Fitting & Inspection \nWHAT DO I DO ON THE DAY? \n• Training is a combination of theory and practical — approx. 3 hour classroom & 3 hour practical. \nWHAT DO I GET ON COMPLETION OF THE COURSE? \nOn successful completion of this course\, students will be issued with a Nationally Recognised Statement of Attainment & pocket competency card for RIIHAN301E Operate Elevating Work Platform. \nNotice of Satisfactory Assessment is issued for EWP operation. \nThe Unique Student Identifier (USI) must be supplied and verified prior to issuance.
URL:https://lta.itcc.net.au/event/scissorlift-course-warrnambool-3/
LOCATION:McKinnon Quarries & Civil\, 6 Chatham Ct\, Warrnambool\, Victoria\, 3280\, Australia
ATTACH;FMTTYPE=image/jpeg:https://lta.itcc.net.au/wp-content/uploads/2025/04/JLG-Scissorlift.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Melbourne:20260922T080000
DTEND;TZID=Australia/Melbourne:20260924T160000
DTSTAMP:20260914T222647Z
CREATED:20260608T112946Z
LAST-MODIFIED:20260914T222647Z
UID:5427-1790064000-1790265600@lta.itcc.net.au
SUMMARY:Telehandler High Risk Licence Warrnambool
DESCRIPTION:Telehandlers over 3 tonne S.W.L require High Risk Work Licencing. \nPreviously classified as cranes\, these machines now have their own classification. This is High Risk Equipment & operators need to be properly trained & licenced. \nHigh Risk Work licence issued is valid for Telehandlers of any capacity. \nCOURSE CONTENT SUMMARY \nAt the successful completion of this course\, participants will be able to safely inspect & operate a Telehandler.\nCourse contents include: \n• Legislative Requirements\n• Hazard Identification & Control\n• Communications\n• Pre-Start inspections\n• Start up operational checks\n• General Operations\n• Rated Capacity\n• Load Centre Principles\n• Calculations of load weight\n• Shut Down \nCOURSE REQUIREMENTS\n• Applicants must be over 18 & have a good grasp of English & a basic ability for math.\n• Pre-Study material is issued for this course. \nCOURSE OVERVIEW \n• Training is a combination of theory\, practical & assessment— 24 hours over three days. \nWHAT DO I GET ON COMPLETION OF THE COURSE? \nOn successful completion of this course\, students will be issued with a Nationally Recognised\nStatement of Attainment for 11249NAT Licence to Operate a Non-Slewing Telehandler. \nA notice of satisfactory assessment is issued & the applicant is required to take this to any Australia Post outlet within 60 days\, along with 100 points of ID & Worksafe licence fee. \nThe Unique Student Identifier (USI) must be supplied and verified prior to issuance. \n*Students will be required to present photo I.D on arrival\, wear normal casual clothing and safety footwear and have completed pre-study material. \nStudents will be provided with morning tea and coffee.\nKitchen facilities are available to people who wish to bring their own lunch or alternatively there are cafés and lunch bars within close proximity. \nDelivered in association with The Management Edge (Trade Training) RTO #3927
URL:https://lta.itcc.net.au/event/telehandler-high-risk-licence-warrnambool/
LOCATION:McKinnon Quarries & Civil\, 6 Chatham Ct\, Warrnambool\, Victoria\, 3280\, Australia
ATTACH;FMTTYPE=image/jpeg:https://lta.itcc.net.au/wp-content/uploads/2024/07/Telehandler-2.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Melbourne:20260908T083000
DTEND;TZID=Australia/Melbourne:20260910T163000
DTSTAMP:20260805T222016Z
CREATED:20260608T101615Z
LAST-MODIFIED:20260805T222016Z
UID:5405-1788856200-1789057800@lta.itcc.net.au
SUMMARY:Telehandler High Risk Licence Horsham
DESCRIPTION:Telehandlers over 3 tonne S.W.L require High Risk Work Licencing. \nPreviously classified as cranes\, these machines now have their own classification. This is High Risk Equipment & operators need to be properly trained & licenced. \nHigh Risk Work licence issued is valid for Telehandlers of any capacity. \nCOURSE CONTENT SUMMARY \nAt the successful completion of this course\, participants will be able to safely inspect & operate a Telehandler.\nCourse contents include: \n• Legislative Requirements\n• Hazard Identification & Control\n• Communications\n• Pre-Start inspections\n• Start up operational checks\n• General Operations\n• Rated Capacity\n• Load Centre Principles\n• Calculations of load weight\n• Shut Down \nCOURSE REQUIREMENTS\n• Applicants must be over 18 & have a good grasp of English & a basic ability for math.\n• Pre-Study material is issued for this course. \nCOURSE OVERVIEW \n• Training is a combination of theory\, practical & assessment— 24 hours over three days. \nWHAT DO I GET ON COMPLETION OF THE COURSE? \nOn successful completion of this course\, students will be issued with a Nationally Recognised\nStatement of Attainment for 11249NAT Licence to Operate a Non-Slewing Telehandler. \nA notice of satisfactory assessment is issued & the applicant is required to take this to any Australia Post outlet within 60 days\, along with 100 points of ID & Worksafe licence fee. \nThe Unique Student Identifier (USI) must be supplied and verified prior to issuance. \n*Students will be required to present photo I.D on arrival\, wear normal casual clothing and safety footwear and have completed pre-study material. \nStudents will be provided with morning tea and coffee.\nKitchen facilities are available to people who wish to bring their own lunch or alternatively there are cafés and lunch bars within close proximity. \nDelivered in association with The Management Edge (Trade Training) RTO #3927
URL:https://lta.itcc.net.au/event/telehandler-high-risk-licence-horsham/
LOCATION:O’Connors\, 423 Western Hwy\, Horsham\, Victoria\, 3400\, Australia
ATTACH;FMTTYPE=image/jpeg:https://lta.itcc.net.au/wp-content/uploads/2024/07/Telehandler-1.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Melbourne:20260902T083000
DTEND;TZID=Australia/Melbourne:20260904T160000
DTSTAMP:20260820T095850Z
CREATED:20260608T103954Z
LAST-MODIFIED:20260820T095850Z
UID:5423-1788337800-1788537600@lta.itcc.net.au
SUMMARY:Telehandler High Risk Licence BALLARAT
DESCRIPTION:Telehandlers over 3 tonne S.W.L require High Risk Work Licencing. \nPreviously classified as cranes\, these machines now have their own classification. This is High Risk Equipment & operators need to be properly trained & licenced. \nHigh Risk Work licence issued is valid for Telehandlers of any capacity. \nCOURSE CONTENT SUMMARY \nAt the successful completion of this course\, participants will be able to safely inspect & operate a Telehandler.\nCourse contents include: \n• Legislative Requirements\n• Hazard Identification & Control\n• Communications\n• Pre-Start inspections\n• Start up operational checks\n• General Operations\n• Rated Capacity\n• Load Centre Principles\n• Calculations of load weight\n• Shut Down \nCOURSE REQUIREMENTS\n• Applicants must be over 18 & have a good grasp of English & a basic ability for math.\n• Pre-Study material is issued for this course. \nCOURSE OVERVIEW \n• Training is a combination of theory\, practical & assessment— 24 hours over three days. \nWHAT DO I GET ON COMPLETION OF THE COURSE? \nOn successful completion of this course\, students will be issued with a Nationally Recognised\nStatement of Attainment for 11249NAT Licence to Operate a Non-Slewing Telehandler. \nA notice of satisfactory assessment is issued & the applicant is required to take this to any Australia Post outlet within 60 days\, along with 100 points of ID & Worksafe licence fee. \nThe Unique Student Identifier (USI) must be supplied and verified prior to issuance. \n*Students will be required to present photo I.D on arrival\, wear normal casual clothing and safety footwear and have completed pre-study material. \nStudents will be provided with morning tea and coffee.\nKitchen facilities are available to people who wish to bring their own lunch or alternatively there are cafés and lunch bars within close proximity. \nDelivered in association with The Management Edge (Trade Training) RTO #3927
URL:https://lta.itcc.net.au/event/telehandler-high-risk-licence-ballarat-3/
LOCATION:O’Connors Ballarat\, 1 Liberator Drive\, Mitchell Park\, Victoria\, 3355\, Australia
ATTACH;FMTTYPE=image/jpeg:https://lta.itcc.net.au/wp-content/uploads/2024/07/Telehandler-2.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Melbourne:20260831T083000
DTEND;TZID=Australia/Melbourne:20260901T163000
DTSTAMP:20260720T103342Z
CREATED:20260720T103342Z
LAST-MODIFIED:20260720T103342Z
UID:5597-1788165000-1788280200@lta.itcc.net.au
SUMMARY:Elevated Work Platform (EWP) Course Horsham
DESCRIPTION:An Elevated Work Platform with a nominal reach of 11 meters or more requires that the operator have Worksafe accreditation. Smaller EW operation still requires the employer to provide adequate information\, instruction & training to their employees. \nEW operation is often the most effective method to safely work at heights. A National “High Risk” Licence for EWP allows for operation of machines of any configuration & size Australia wide. \nCOURSE CONTENT SUMMARY \nAt the successful completion of this course\, participants will be able to safely inspect & operate an EWP. Course contents include: \n• Legislative Requirements\n• Hazard Identification & Control\n• Communications\n• Pre-Start inspections\n• Start up operational checks\n• General Operations\n• Emergency Descent Procedures & Methods\n• Rescue Procedures\n• Harness fitting & inspection\n• Shut Down \nCOURSE REQUIREMENTS\n• Applicants must be over 18 & have a good grasp of English & a basic ability for math.\n• Pre-Study material is issued for this course. \nWHAT DO I DO ON THE DAY? \n• Training is a combination of theory\, practical & assessment—16 hours over two days. \nWHAT DO I GET ON COMPLETION OF THE COURSE? \nOn successful completion of this course\, students will be issued with a Nationally Recognised\nStatement of Attainment for TLILIC0005—Licence to Operate a Boom Type Elevating Work\nPlatform. \nA notice of satisfactory assessment is issued & the applicant is required to take this to\nany Australia Post outlet within 60 days\, along with 100 points of ID & WorkSafe licence fee.
URL:https://lta.itcc.net.au/event/elevated-work-platform-ewp-course-horsham/
LOCATION:O’Connors\, 423 Western Hwy\, Horsham\, Victoria\, 3400\, Australia
ATTACH;FMTTYPE=image/jpeg:https://lta.itcc.net.au/wp-content/uploads/2023/07/EWP.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Melbourne:20260827T080000
DTEND;TZID=Australia/Melbourne:20260828T160000
DTSTAMP:20260820T095813Z
CREATED:20260608T101945Z
LAST-MODIFIED:20260820T095813Z
UID:5408-1787817600-1787932800@lta.itcc.net.au
SUMMARY:Forklift Course Warrnambool
DESCRIPTION:Forklifts are perhaps the most versatile & commonly used machinery used in Industry. \nWhile most industrial workplaces have at least one forklift\, this is High Risk Equipment & operators need to be properly trained & licenced. \nHigh Risk Work National Licences are valid across Australia & are for Forklifts of any capacity. \nCOURSE CONTENT SUMMARY \nAt the successful completion of this course\, participants will be able to safely inspect & operate a forklift.\nCourse contents include: \n• Legislative Requirements\n• Hazard Identification & Control\n• Communications\n• Pre-Start inspections\n• Start up operational checks\n• General Operations\n• Rated Capacity\n• Load Centre Principles\n• Calculations of load weight\n• Shut Down \nCOURSE REQUIREMENTS\n• Applicants must be over 18 & have a good grasp of English & a basic ability for math.\n• Pre-Study material is issued for this course. \nWHAT DO I DO ON THE DAY? \n• Training is a combination of theory\, practical & assessment—16 hours over two days. \nWHAT DO I GET ON COMPLETION OF THE COURSE? \nOn successful completion of this course\, students will be issued with a Nationally Recognised Statement of Attainment for TLILIC0003—Licence to Operate a Forklift Truck. \nA notice of satisfactory assessment is issued & the applicant is required to take this to any Australia Post outlet within 60 days\, along with 100 points of ID & Worksafe licence fee. \nThe Unique Student Identifier (USI) must be supplied and verified prior to issuance. \n 
URL:https://lta.itcc.net.au/event/forklift-course-warrnambool-4/
LOCATION:McKinnon Quarries & Civil\, 6 Chatham Ct\, Warrnambool\, Victoria\, 3280\, Australia
ATTACH;FMTTYPE=image/jpeg:https://lta.itcc.net.au/wp-content/uploads/2022/06/Forklift-2.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Melbourne:20260825T080000
DTEND;TZID=Australia/Melbourne:20260826T160000
DTSTAMP:20260608T102539Z
CREATED:20260608T102539Z
LAST-MODIFIED:20260608T102539Z
UID:5411-1787644800-1787760000@lta.itcc.net.au
SUMMARY:Forklift Course Warrnambool
DESCRIPTION:Forklifts are perhaps the most versatile & commonly used machinery used in Industry. \nWhile most industrial workplaces have at least one forklift\, this is High Risk Equipment & operators need to be properly trained & licenced. \nHigh Risk Work National Licences are valid across Australia & are for Forklifts of any capacity. \nCOURSE CONTENT SUMMARY \nAt the successful completion of this course\, participants will be able to safely inspect & operate a forklift.\nCourse contents include: \n• Legislative Requirements\n• Hazard Identification & Control\n• Communications\n• Pre-Start inspections\n• Start up operational checks\n• General Operations\n• Rated Capacity\n• Load Centre Principles\n• Calculations of load weight\n• Shut Down \nCOURSE REQUIREMENTS\n• Applicants must be over 18 & have a good grasp of English & a basic ability for math.\n• Pre-Study material is issued for this course. \nWHAT DO I DO ON THE DAY? \n• Training is a combination of theory\, practical & assessment—16 hours over two days. \nWHAT DO I GET ON COMPLETION OF THE COURSE? \nOn successful completion of this course\, students will be issued with a Nationally Recognised Statement of Attainment for TLILIC0003—Licence to Operate a Forklift Truck. \nA notice of satisfactory assessment is issued & the applicant is required to take this to any Australia Post outlet within 60 days\, along with 100 points of ID & Worksafe licence fee. \nThe Unique Student Identifier (USI) must be supplied and verified prior to issuance. \n 
URL:https://lta.itcc.net.au/event/forklift-course-warrnambool-6/
LOCATION:McKinnon Quarries & Civil\, 6 Chatham Ct\, Warrnambool\, Victoria\, 3280\, Australia
ATTACH;FMTTYPE=image/jpeg:https://lta.itcc.net.au/wp-content/uploads/2022/05/Forklift.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Melbourne:20260824T083000
DTEND;TZID=Australia/Melbourne:20260824T143000
DTSTAMP:20260820T095734Z
CREATED:20260709T104123Z
LAST-MODIFIED:20260820T095734Z
UID:5559-1787560200-1787581800@lta.itcc.net.au
SUMMARY:Scissorlift Course Warrnambool
DESCRIPTION:An Elevated Work Platform (EWP) with a nominal reach of 11 metres or more requires that the operator have Worksafe Licencing. Smaller EWP operation still requires the employer to provide adequate information\, instruction and training to their employees. EWP operation is often the most effective method to safely work at heights. \nA Nationally recognised qualification is issued on successful completion. \nThis Competency covers Scissor & Vertical Lifts of any size or height. \nCOURSE CONTENT SUMMARY \nAt the completion of this course\, participants will be able to safely inspect and use an Elevated Work Platform. Most trades in most industries require their workers to gain access to jobs at heights. \nCourse outline includes: \n• Regulations\n• Duties of employers and employees\n• Hazard Identification\n• Hazard control measures\n• Duty of care\n• Pre-Start Inspections\n• Log Book Documentation\n• Emergency Descent Procedures and Methods\n• Rescue Procedures\n• Safety Equipment\n• Traffic/Pedestrian Control\n• Tools and Equipment\n• Harness Fitting & Inspection \nWHAT DO I DO ON THE DAY? \n• Training is a combination of theory and practical — approx. 3 hour classroom & 3 hour practical. \nWHAT DO I GET ON COMPLETION OF THE COURSE? \nOn successful completion of this course\, students will be issued with a Nationally Recognised Statement of Attainment & pocket competency card for RIIHAN301E Operate Elevating Work Platform. \nNotice of Satisfactory Assessment is issued for EWP operation. \nThe Unique Student Identifier (USI) must be supplied and verified prior to issuance.
URL:https://lta.itcc.net.au/event/scissorlift-course-warrnambool-2/
LOCATION:McKinnon Quarries & Civil\, 6 Chatham Ct\, Warrnambool\, Victoria\, 3280\, Australia
ATTACH;FMTTYPE=image/jpeg:https://lta.itcc.net.au/wp-content/uploads/2025/04/JLG-Scissorlift.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Melbourne:20260813T080000
DTEND;TZID=Australia/Melbourne:20260814T160000
DTSTAMP:20260805T222126Z
CREATED:20260608T103053Z
LAST-MODIFIED:20260805T222126Z
UID:5414-1786608000-1786723200@lta.itcc.net.au
SUMMARY:Forklift Course Warrnambool
DESCRIPTION:Forklifts are perhaps the most versatile & commonly used machinery used in Industry. \nWhile most industrial workplaces have at least one forklift\, this is High Risk Equipment & operators need to be properly trained & licenced. \nHigh Risk Work National Licences are valid across Australia & are for Forklifts of any capacity. \nCOURSE CONTENT SUMMARY \nAt the successful completion of this course\, participants will be able to safely inspect & operate a forklift.\nCourse contents include: \n• Legislative Requirements\n• Hazard Identification & Control\n• Communications\n• Pre-Start inspections\n• Start up operational checks\n• General Operations\n• Rated Capacity\n• Load Centre Principles\n• Calculations of load weight\n• Shut Down \nCOURSE REQUIREMENTS\n• Applicants must be over 18 & have a good grasp of English & a basic ability for math.\n• Pre-Study material is issued for this course. \nWHAT DO I DO ON THE DAY? \n• Training is a combination of theory\, practical & assessment—16 hours over two days. \nWHAT DO I GET ON COMPLETION OF THE COURSE? \nOn successful completion of this course\, students will be issued with a Nationally Recognised Statement of Attainment for TLILIC0003—Licence to Operate a Forklift Truck. \nA notice of satisfactory assessment is issued & the applicant is required to take this to any Australia Post outlet within 60 days\, along with 100 points of ID & Worksafe licence fee. \nThe Unique Student Identifier (USI) must be supplied and verified prior to issuance. \n 
URL:https://lta.itcc.net.au/event/forklift-course-warrnambool-8/
LOCATION:McKinnon Quarries & Civil\, 6 Chatham Ct\, Warrnambool\, Victoria\, 3280\, Australia
ATTACH;FMTTYPE=image/jpeg:https://lta.itcc.net.au/wp-content/uploads/2022/06/Forklift-Photo.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Melbourne:20260812T083000
DTEND;TZID=Australia/Melbourne:20260812T143000
DTSTAMP:20260707T113944Z
CREATED:20260608T103616Z
LAST-MODIFIED:20260707T113944Z
UID:5420-1786523400-1786545000@lta.itcc.net.au
SUMMARY:White Card Course Warrnambool
DESCRIPTION:**NEW COURSE ADDED 10th AUGUST** \nThis course is endorsed by & meets the requirements of Worksafe Authorities Nationally\nconcerning induction training for the building & construction industry. \nThe “Construction Induction Card’ (WHITE CARD) issued upon successful completion of the course is\nissued by Worksafe Victoria & legally entitles the holder for entry to building & construction sites throughout Australia. \nTOPICS COVERED: \n-Legislation\, Industry agreements & training \n-Workcover & the inspectorate \n-Codes of practice\, workers compensation \n-Working at heights \n-Organising OH&S \n-Risk Management \n-Material Safety Data Sheets (M.S.D.S) \n-Manual Handling \n-Site signage\, emergency & evacuation \n-Scaffolding Standards \n-Sexual Harassment & Bullying Trenching \n-Building Hazards/Control \n-P.P.E \n-Confined Space Hazards \nPhoto identification MUST be supplied on day of Course. \nThe Unique Student Identifier (USI) must be supplied and verified prior to issuance.
URL:https://lta.itcc.net.au/event/white-card-course-warrnambool-2/
LOCATION:The Flying Horse\, 10691 Princes Hwy\, Warrnambool\, Victoria\, 3280\, Australia
ATTACH;FMTTYPE=image/jpeg:https://lta.itcc.net.au/wp-content/uploads/2022/06/White-Card.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Melbourne:20260811T083000
DTEND;TZID=Australia/Melbourne:20260811T153000
DTSTAMP:20260608T112129Z
CREATED:20260608T103322Z
LAST-MODIFIED:20260608T112129Z
UID:5417-1786437000-1786462200@lta.itcc.net.au
SUMMARY:Electrical Spotters Course Warrnambool
DESCRIPTION:COURSE CONTENT SUMMARY \nThis course will enable participants to clearly understand the role of the Spotter as the safety observer to warn mobile plant & crane operators in the proximity of powerlines & underground assets\, inclusive of communications\, water\, sewerage & power. \nThis course is recognised by Energy Safe Victoria (ESV) & the Victorian WorkSafe Authority as meeting the requirement under Victorian Regulations for Plant Operations near overhead powerlines & underground assets. \nCourse content includes: \n• Role of the Spotter\n• Victorian “NO GO” Zones\n• Safety Assessment process\n• Signalling procedures\n• Types of Powerlines\n• Permit application process\n• Height assessment\n• Accident procedures \nWHAT DO I DO ON THE DAY? \n• Training is a combination of theory and practical. Approx 6 hours classroom and 2 hours practical \nWHAT DO I NEED? \nStudents must bring copies of their current CPR\n(within 12 months) & current First Aid (within 3\nyears). \nStudents must also bring their operators tickets or\nlicence for items of plant they wish to spot for.\nValid Photo ID must be presented. \nWHAT DO I GET ON COMPLETION OF THE COURSE? \nOn successful completion of this course\, students will be issued with a Nationally Recognised Statement of Attainment for 22325VIC Course in Workplace Spotting for Service Assets. \nStudent will be sent an Energy Safe Victoria Spotters Card stating the items of plant they are permit- ted to spot for. This registration will be valid for 3 years\, a refresher course will then be required. \nThe Unique Student Identifier (USI) must be supplied and verified prior to issuance. \n 
URL:https://lta.itcc.net.au/event/electrical-spotters-course-warrnambool/
LOCATION:The Flying Horse\, 10691 Princes Hwy\, Warrnambool\, Victoria\, 3280\, Australia
ATTACH;FMTTYPE=image/jpeg:https://lta.itcc.net.au/wp-content/uploads/2023/01/Electrical-Spotters.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Melbourne:20260810T083000
DTEND;TZID=Australia/Melbourne:20260810T143000
DTSTAMP:20260707T113059Z
CREATED:20260707T113059Z
LAST-MODIFIED:20260707T113059Z
UID:5548-1786350600-1786372200@lta.itcc.net.au
SUMMARY:White Card Course Warrnambool
DESCRIPTION:This course is endorsed by & meets the requirements of Worksafe Authorities Nationally\nconcerning induction training for the building & construction industry. \nThe “Construction Induction Card’ (WHITE CARD) issued upon successful completion of the course is\nissued by Worksafe Victoria & legally entitles the holder for entry to building & construction sites throughout Australia. \nTOPICS COVERED: \n-Legislation\, Industry agreements & training \n-Workcover & the inspectorate \n-Codes of practice\, workers compensation \n-Working at heights \n-Organising OH&S \n-Risk Management \n-Material Safety Data Sheets (M.S.D.S) \n-Manual Handling \n-Site signage\, emergency & evacuation \n-Scaffolding Standards \n-Sexual Harassment & Bullying Trenching \n-Building Hazards/Control \n-P.P.E \n-Confined Space Hazards \nPhoto identification MUST be supplied on day of Course. \nThe Unique Student Identifier (USI) must be supplied and verified prior to issuance.
URL:https://lta.itcc.net.au/event/white-card-course-warrnambool-3/
LOCATION:The Flying Horse\, 10691 Princes Hwy\, Warrnambool\, Victoria\, 3280\, Australia
ATTACH;FMTTYPE=image/jpeg:https://lta.itcc.net.au/wp-content/uploads/2022/10/White-Card-Pic.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Melbourne:20260806T083000
DTEND;TZID=Australia/Melbourne:20260806T143000
DTSTAMP:20260608T101008Z
CREATED:20260608T101008Z
LAST-MODIFIED:20260608T101008Z
UID:5402-1786005000-1786026600@lta.itcc.net.au
SUMMARY:Scissorlift Course Horsham
DESCRIPTION:An Elevated Work Platform (EWP) with a nominal reach of 11 metres or more requires that the operator have Worksafe Licencing. Smaller EWP operation still requires the employer to provide adequate information\, instruction and training to their employees. EWP operation is often the most effective method to safely work at heights. \nA Nationally recognised qualification is issued on successful completion. \nThis Competency covers Scissor & Vertical Lifts of any size or height. \nCOURSE CONTENT SUMMARY \nAt the completion of this course\, participants will be able to safely inspect and use an Elevated Work Platform. Most trades in most industries require their workers to gain access to jobs at heights. \nCourse outline includes: \n• Regulations\n• Duties of employers and employees\n• Hazard Identification\n• Hazard control measures\n• Duty of care\n• Pre-Start Inspections\n• Log Book Documentation\n• Emergency Descent Procedures and Methods\n• Rescue Procedures\n• Safety Equipment\n• Traffic/Pedestrian Control\n• Tools and Equipment\n• Harness Fitting & Inspection \nWHAT DO I DO ON THE DAY? \n• Training is a combination of theory and practical — approx. 3 hour classroom & 3 hour practical. \nWHAT DO I GET ON COMPLETION OF THE COURSE? \nOn successful completion of this course\, students will be issued with a Nationally Recognised Statement of Attainment & pocket competency card for RIIHAN301E Operate Elevating Work Platform. \nNotice of Satisfactory Assessment is issued for EWP operation. \nThe Unique Student Identifier (USI) must be supplied and verified prior to issuance.
URL:https://lta.itcc.net.au/event/scissorlift-course-horsham-3/
LOCATION:Golden Grain Motor Inn\, 6 Dimboola Rd\, Horsham\, Victoria\, 3400\, Australia
ATTACH;FMTTYPE=image/jpeg:https://lta.itcc.net.au/wp-content/uploads/2025/04/JLG-Scissorlift.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Melbourne:20260805T083000
DTEND;TZID=Australia/Melbourne:20260805T160000
DTSTAMP:20260608T100251Z
CREATED:20260608T100251Z
LAST-MODIFIED:20260608T100251Z
UID:5399-1785918600-1785945600@lta.itcc.net.au
SUMMARY:Work Safely at Heights Course Horsham
DESCRIPTION:Workplace Health & Safety (Prevention of falls) Regulations 2012 (2017 Vic) are now in effect. \nThese regulations place obligations on employers to take preventative action if there is any likelihood of an employee being subjected to a fall risk from one level to another. \nSafe Working at Heights is a must for most employees in the workforce. This course covers all training requirements as detailed in the National Code of Practice – Managing the risks of Falls in the Workplace (Dec 2011) \nCOURSE CONTENT SUMMARY \nAt the completion of this course\, applicants will have a clear understanding of their rights and obligations under the Prevention of falls regulations.\nThey will be able to identify the hazards associated with falls risks & implement effective control measures. \n• Introduction to WHS (Prevention of Falls) Regulations\n• Duties of employers\n• Duties of employees\n• Duty of Care\n• Hazard Identification\n• Hazard Control Measures\n• Safe use of Ladders\n• Safe use of Scaffolds\n• Safe use of Elevated Work Platforms\n• Passive fall prevention devices\n• Work positioning systems\n• Fall restraint systems\n• Fall arrest systems\n• Harness fitting and inspection \nWHAT DO I DO ON THE DAY? \n• Training is a combination of theory and practical – 8 hours. \nWHAT DO I GET ON COMPLETION OF THE COURSE? \nOn successful completion of this course\, students will be issued with a Nationally Recognised Statement of Attainment for RIIWHS204E Work Safely at Heights and a wallet sized card. \nThe Unique Student Identifier (USI) must be supplied and verified prior to issuance (www.usi.gov.au)
URL:https://lta.itcc.net.au/event/work-safely-at-heights-course-horsham/
LOCATION:O’Connors\, 423 Western Hwy\, Horsham\, Victoria\, 3400\, Australia
ATTACH;FMTTYPE=image/jpeg:https://lta.itcc.net.au/wp-content/uploads/2022/10/Working-at-Heights.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Melbourne:20260804T083000
DTEND;TZID=Australia/Melbourne:20260804T160000
DTSTAMP:20260608T095515Z
CREATED:20260608T095515Z
LAST-MODIFIED:20260608T095515Z
UID:5396-1785832200-1785859200@lta.itcc.net.au
SUMMARY:Confined Space Entry Course Horsham
DESCRIPTION:Work in Confined Spaces is one of the most dangerous tasks performed in the workplace. \nOn average 15 workers are killed in Australia Each year whilst working in confined spaces. \nBecause of this\, training is compulsory and employers are obligated to ensure training for the employees is current and up to date. \nCOURSE CONTENT SUMMARY \nAt the completion of this course\, applicants will be able to safely identify confined spaces\, hazards applicable to confined spaces and methods to control these hazards. \nContent includes: \n• Regulations\n• Duties of employers and employees\n• Hazard Identification\n• Hazard control measures & hierarchy of control\n• Exposure Limits TWA & STEL\n• Safe work procedures\n• Personal Protective Equipment\n• Entry permit requirements\n• Rescue procedures\n• Emergency procedures\n• Safe methods of entry and exit\n• Restricted spaces\n• Duties of attendant\, entrant and supervisor \nWHAT DO I DO ON THE DAY? \n• Training is a combination of theory and practical—8 hours. \nWHAT DO I GET ON COMPLETION OF THE COURSE? \nOn successful completion of this course\, students will be issued with a Nationally Recognised Statement of Attainment for RIIWHS202E Enter and Work in Confined Spaces and a wallet sized card.\nThe Unique Student Identifier (USI) must be supplied and verified prior to issuance (www.usi.gov.au)
URL:https://lta.itcc.net.au/event/confined-space-entry-course-horsham/
LOCATION:O’Connors\, 423 Western Hwy\, Horsham\, Victoria\, 3400\, Australia
ATTACH;FMTTYPE=image/jpeg:https://lta.itcc.net.au/wp-content/uploads/2022/06/Confined-Space-1.jpg
END:VEVENT
END:VCALENDAR